EverStrong Edge Hardener
EverStrong Edge Hardener
EverStrong™ Edge Hardener is a water-based penetrating sealer designed to stiffen the edges of fiberglass insulation panels, eliminating the need for strips, channels, and frames. This provides an easy handling and installation experience and saves labor and material costs. Edge Hardener is formulated with high-temperature resistance, fast drying time, no solvents, no VOCs, and is non-flammable and CA compliant.
Key Features
- Fast Setting
- Solvent Free
- SCAQMD Rule 1168 & OTC Compliant
- OSHA Compliant (29CFR 1910.1200)
- High Temperature Resistance
- Non-Flammable
Product Usage
EverStrong™ Edge Hardener is designed to be applied to the edges of fiberglass panels. For best results: Make sure that the surfaces are dry and free from dirt, grease or oil. Ensure that the coating and substrates are at 50°F or higher. Wipe all excess coating with a clean, moist cloth. Not recommended for Exterior use or wet, high moisture conditions.
Storage
After use, close container tightly. Store in cool dry location at 50-80°F. Protect from freezing.
Physical Properties
Appearance: White Liquid
Specific Gravity: 1.07 to 1.11 gm/cc
Solvent: Water based, no solvents
Flashpoint: > 200°F
Flammability: Non-Flammable per ASTM 681-04
Shelf Life: 12 months
Freezing: Protect from freezing.
Packaging
ESEH-001 4-1 gal Jugs
ESEH-005 5 gal Pail
ESEH-055 55 gal Drum
Disclaimer of Warranty
NewStar Adhesives Inc. expressly disclaims all warranties either expressed or implied, including but not limited to merchantability, fitness for particular purpose. User is responsible for determining this product is fit for specific purpose and application method and assumes all risk and liability herewith. Manufacturer liability is limited to replacement of product or reimbursement of purchase cost. This provision relates to all sales and cannot be modified.
See MSDS Data Sheet for Proper Handling and Safety Information
