Product Usage

Spray 6-8 inches from surface, apply uniformly. Do not allow to puddle. Allow adhesive to dry to the touch before bonding. Spray both surfaces for stronger bonds.Place the surfaces together and apply pressure evenly across the full bonding surface. For best results: Make sure that the surfaces are dry and free from dirt, grease, oil or other contaminants. Ensure that the adhesives and substrates are at 60°F or higher. If surfaces are porous, a second coat is recommended after the first has dried and become tacky.

Storage

Store in a well ventilated space. Protect from direct sunlight. Do not expose to temperatures exceeding 50°C/122°F.

Physical Properties

Odor, Color: Organic solvent odor, clear or red in color
Boiling point: Not determined
Vapor Pressure: Not Determined
Vapor Density: Not Determined
Specific Gravity: .60 – .70 g/cc
Solubility in Water: Negligible
Volatile Organic Compounds: 55 – 65 % by weight
Volatile Organic Compounds: 350 – 450 g/L
Flash Point: -156° F (-104 C)
LEL: 2.2% volume
UEL: 9.5 % volume

Packaging

ES55-013C 13 oz Aerosol Can

Disclaimer of Warranty

NewStar Adhesives Inc. expressly disclaims all warranties either expressed or implied, including but not limited to merchantability, fitness for particular purpose. User is responsible for determining this product is fit for specific purpose and application method and assumes all risk and liability herewith. Manufacturer liability is limited to replacement of product or reimbursement of purchase cost. This provision relates to all sales and cannot be modified.

See MSDS Data Sheet for Proper Handling and Safety Information