EverBond EB99 – Infusion Mold Adhesive
Infusion Mold Adhesive
EverBond EB99 is a specialty industrial spray adhesive specifically designed for the infusion molding process. EB99 is designed to adhere and hold reinforcing fiberglass materials (mats, pads, strips) in place prior to and during resin infusion. Specifically formulated for the infusion process, EB99 will not interfere with the polymer matrix integrity and will cross-link with resins to create an integrated matrix.
Key Features
Specifically Formulated for Infusion
Vacuum Molding
Fast Tack for securing reinforcing materials in mold
Low Shrinkage during Cure
NO HAPS
Compatible with Infusion resins
Product Usage
EverBond EB99 is designed to be applied to the reinforcing materials or mold prior to placement. Spray a uniform coat to the surface to be adhered. If heavy mat or pad, apply adhesive to both surfaces about to be joined. Spray an even coat of adhesive with at least 80% to 100% coverage of each surface. Allow to briefly dry until tacky. Place the surfaces together and apply pressure. For best results: Make sure that the surfaces are dry and free from dirt, grease or oil. Ensure that the adhesives and materials are at 60°F or higher. If surfaces are porous, a heavier coat is recommended.
Storage
After use, do not close the valve. Leave the gun and hose connected to the canister. Recommended to store canister off the floor if temperatures below 60°F.
Physical Properties
Appearance: Liquid, clear or red
Specific Gravity: .70 - .80 g/cc
Spray Tip: 6501
Spray Pattern: Web Spray
Flammability: Flammable per ASTM E-681-04
Solvent: Hydrocarbons
Shelf Life: 15 months
Freezing: Not damaged by freezing but return to room
temp before use.
Packaging
EB99-0013C(R) 13 oz Aerosol Can
EB99-009C(R) 9 lbs Disposable Canister
EB99-027C(R) 27 lbs Disposable Canister
EB99-140C(R) 140 lbs Returnable Canister
EB99-270C(R) 270 lbs Returnable Canister
All available in Clear (C) or Red (R)
Disclaimer of Warranty
NewStar Adhesives Inc. expressly disclaims all warranties either expressed or implied, including but not limited to merchantability, fitness for particular purpose. User is responsible for determining this product is fit for specific purpose and application method and assumes all risk and liability herewith. Manufacturer liability is limited to replacement of product or reimbursement of purchase cost. This provision relates to all sales and cannot be modified.
See MSDS Data Sheet for Proper Handling and Safety Information
