NewStar Adhesives logo

CALL NEWSTAR: 855-497-0700

N900 – Marine Infusion Adhesive

Marine Infusion Adhesive

EverHold N900 is an adhesive specifically designed for the infusion molding process. N900 is designed to adhere and hold reinforcing materials (fiberglass, soric, peel ply and core boards) in place prior to and during infusion. Specially formulated for the infusion process, N900 will not interfere with the polymer matrix integrity and will cross-link with resins to create an integrated matrix.

Key Features

- Specifically Formulated for Vacuum Infusion
- High Tack ensures optimal hold
- Low Shrinkage during Cure
- Compatible with Infusion resins
- ASTM – D790

Product Usage

EverHold N900 is designed to be applied to the reinforcing materials or mold prior to placement. Spray a uniform coat to the surface to be adhered. For heavier materials, apply adhesive to both surfaces about to be joined. Spray an even coat of adhesive with at least 80% to 100% coverage of each surface. Allow to briefly dry until tacky. Place the surfaces together and apply pressure. For best results, ensure that the surfaces are dry and free from dirt, grease or oil. Adhesives and materials should be kept at 60°F or higher. If surfaces are porous, a heavier coat is recommended.


For canisters, do not close the valve after use. Leave the gun and hose connected to the canister. Recommended to store canister off the floor if temperatures below 60°F.

Physical Properties

Appearance: Liquid, clear or red
Specific Gravity: .74 + .03
Spray Tip: 6501
Spray Pattern: Pebble Spray
Flammability: Flammable per ASTM E-681-04
Solvent: Hydrocarbons
Shelf Life: 15 months
Freezing: Not damaged by freezing but return to room temp before use.


N900-013C(R) 13 oz Aerosol Can
N900-009C(R) 9 lbs Disposable Canister
N900-027C(R) 27 lbs Disposable Canister
N900-140C(R) 140 lbs Returnable Canister
N900-270C(R) 270 lbs Returnable Canister
All available in Clear (C) or Red (R)

Disclaimer of Warranty

NewStar Adhesives Inc. expressly disclaims all warranties either expressed or implied, including but not limited to merchantability, fitness for particular purpose. User is responsible for determining this product is fit for specific purpose and application method and assumes all risk and liability herewith. Manufacturer liability is limited to replacement of product or reimbursement of purchase cost. This provision relates to all sales and cannot be modified.

See MSDS Data Sheet for Proper Handling and Safety Information