N610 – Marine Veneer Adhesive
Marine Veneer Adhesive
EverHold N610 is a high performance industrial strength contact adhesive formulated with zero VOCs to comply with CA and OTC state regulations. Water resistant and temperature resistant to over 200°F, N610 is designed for bonding a wide range of substrates to include decorative laminates and veneers, fiberglass, glass, upholstery, fabrics, foam, boat headliners, cork and particle board.
- No VOCs
- SCAQMD Rule 1168 & OTC Compliant
- LEED Compliant
- LEED Schools EQ Credit 4.0
- LEED Core & Shell EQ Credit 4.0
- LEED ND & CI EQ Credit 4.1
- LEED EB MR Credit 3.0
- MR Credit 5.1 (specific projects must be evaluated)
- EverStrongTM Fast Tack Bond Performance
- High Temperature resistance
- Pebble Spray Pattern
EverHold N610 is designed to be applied to both surfaces about to be joined. Spray an even coat of adhesive with at least 80% to 100% coverage of each surface. Allow to dry 3-5 minutes til tacky. Place the surfaces together and apply pressure evenly across the full bonding surface. For best results: Make sure that the surfaces are dry and free from dirt, grease or oil. Ensure that the adhesives and substrates are at 60°F or higher. If surfaces are porous, a second coat is recommended after the first has dried and become tacky.
After use, do not close the valve. Leave the gun and hose connected to the canister. Recommended to store canister off the floor if temperatures below 60°F.
Appearance: Liquid, clear or red
Specific Gravity: .95 + .02
Shear Adhesion: >100psi and >200°F
Spray Tip: ES4001
Spray Pattern: Pebble Spray
Flammability: Flammable per ASTM E-681-04
VOC: No VOC’s, No ODS, No HAPS
Shelf Life: 15 months
Freezing: Not damaged by freezing but return to room temp before use.
N610-013C(R) 13 oz Aerosol Can
N610-008C(R) 8 lbs Disposable Canister
N610-030C(R) 27 lbs Disposable Canister
N610-140C(R) 130 lbs Returnable Canister
N610-280C(R) 270 lbs Returnable Canister
N610-005C(R) 5 gal Pail
N610-055C(R) 55 gal Drum
All available in Clear (C) or Red (R)
Disclaimer of Warranty
NewStar Adhesives Inc. expressly disclaims all warranties either expressed or implied, including but not limited to merchantability, fitness for particular purpose. User is responsible for determining this product is fit for specific purpose and application method and assumes all risk and liability herewith. Manufacturer liability is limited to replacement of product or reimbursement of purchase cost. This provision relates to all sales and cannot be modified.
See MSDS Data Sheet for Proper Handling and Safety Information